24
SHoRTCUT FUNCTIoN SeTUP
DTMF Code Transmitting
Press and hold
1.
[PTT]
key, then enter the desired number by key;
DTMF code transmitting
2.
In standby state,press
A�
key ,
display on LCD and then press
key display the desired group and DTMF data;
Turn channel switch or press
B�
/
key to choose the desired DTMF group;
Press key
C�
[PTT]
to send selected DTMF group data
;
Remotely kill/waken
Sending special code (the remotely kill code of the other party), it will make the other party transceiver
of all keys and performance temporarily completely unavailable. Namely, the other party transceiver
has been remotely kill. When it is remotely kill, “
KILL
” is showed on LCD.
Send the other party of remotely kill code + “#” to waken. For example, if “2267” is remotely kill code,
sending “2267#” can waken transceiver. When wakening, “
WAKeN
” is showed on LCD.
NoTe: Remotely kill code should be edited in the programming software.14 digits are the
maximum.
Remotely stun/waken
Sending special code (the remotely stun code of the other party), it will make the other party transceiver
of all keys and performance temporarily completely unavailable except for receiving. Namely, the other
party transceiver has been remotely stun. When it is remotely stun, “
STUN
” is showed on LCD. Send
the other party of remotely stun code + “#” to waken. For example, if “2268”is remotely stun code,
sending “2268#” can waken transceiver.
