background image

Channel Change

Using Your Radio

Power/Menu Button

Volume/Channel (+) and (–) Buttons

Press the 

+

 or 

 button to increase or 

decrease the volume. There are 12 different 
volume levels. 

Press and hold 

Power/Menu

 button for 

4 seconds to turn the 
radio on or off.
Once the unit is on, 
Green LED flashes every 
5 seconds.

To change the channel, press 

Power/Menu

 button once, the current channel number prompted. Then, press 

the 

+

 or 

 buttons to select your channel, and you can:

1. fast press to skip voice prompting of every channel number
2. press and hold for fast skipping
It will exit the channel selection mode if there is no 

+

 or 

-

 button pressing for 5 sec. Or simply press 

Power/Menu

 button or 

Talk

 button once to return to standby mode immediately.

Wearable Walkie Talkie

ACT220

Making Life Easier And Safer

Staying in touch when using your microTALK

®

 radio.

Customer Assistance

In this user’s guide, you should find all the information you need to operate your microTALK

®

 radio.

If you require  further assistance after reading this guide, Cobra offers the following customer

assistance services:

For Assistance In The U.S.A. 

Customer Assistance Operators

 

English and Spanish. 

8:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday (except holidays)

866-721-3805 (phone) or [email protected] (email)

www.cobrawalkietalkie.com

Printed in China,   Pa

rt No. 

KEM-ML41400

User’s Guide

Built-In Speaker

LED Indicator

Built-In 

Microphone

Micro USB Charge/

Audio Jack

Power/

Menu

Button

Swivel Belt Clip

WARNING - CHOCKING HAZARD - SMALL PARTS

Not for children under 3 years. This product is not

intended to be used as a toy or plaything.

• 

Press and hold the 

Talk

 button to communicate with others. 

• 

The microphone should be about 6 inches from your mouth. 

• 

When talking, speak in normal voice. 

• 

Release the 

Talk

 button when you are finished talking and listen for a 

response from the other person. 

• 

You cannot  receive at the same time while pressing the 

Talk

 button. 

 NOTE:

 Both radios must be on the same channel to communicate.

Talk Button

For any questions about operating this new Cobra branded product, 

PLEASE CONTACT US FIRST… do not return this product to the retail 

store. The contact information for support will vary depending on the 

country in which you purchased and utilize the product. 
To obtain warranty service or other information for products 

purchased from Altis itself or through its authorized reseller or agent 

and utilized in the U.S.A., please call our consumer support line at 

(866) 721-3805

, or email us at 

[email protected]

. You will 

receive instructions on how to ship the products at your expense to 

an Altis Global Limited Authorized Service Center. To obtain service, 

you must include: (a) a copy of your receipt, bill of sale or other 

comparable proof of purchase; (b) a written description of the 

problem; and, most importantly; (c) your address and telephone 

number.

For warranty and customer service information outside the US, 

please contact your local dealer.
For further information needed on its features, please visit 

www.cobrawalkietalkie.com

 for frequently asked questions and 

the electronic manual.

Product Service & Support

©2018 Altis Global Limited,

Atlanta, GA USA.

www.cobrawalkietalkie.com

Limited One-Year Warranty

Altis Global Limited warrants to the original consumer purchaser only that this 
product and the component parts thereof, will be free from defects in 
workmanship and materials for a period of one year from the date of first 
consumer purchase. During this period, Altis will, repair or replace, at its sole 
option and discretion, this product or any defective parts.  Altis’ liability 
hereunder shall be limited to repair or replacement of the defective part or parts, 
and such correction shall constitute a fulfillment of all of Altis’ warranties 
hereunder.  
This limited warranty is only valid for the original consumer purchaser in limited 
jurisdictions and is not transferrable.  This limited warranty will automatically 
terminate prior to expiration if this product is sold or otherwise transferred to 
another party.  The product must be purchased from Altis or an authorized 
dealer or the warranty is void.  This limited warranty is valid only for products 
purchased and utilized in specific jurisdictions.  Please visit our website at 

www.cobrawalkietalkie.com

 for a list of jurisdictions wherein this limited 

warranty is valid.      
This limited warranty does not cover damage due to misuse, abuse, negligence, 
acts of God, accident, commercial use or modification of, or to any part of this 
product.  This warranty does not cover damage due to improper operation, 
maintenance or installation; ordinary wear and tear; or attempted alterations or 
repairs by anyone other than Altis or someone authorized by Altis to do warranty 
work.  Any unauthorized alterations or repairs will void this warranty.  This 
limited warranty does not cover product sold AS IS or WITH ALL FAULTS.  This 
limited warranty is invalid if the factory applied serial number or date stamp has 
been altered, defaced or removed from this product.  This limited warranty does 
not cover product purchased or utilized in a jurisdiction not covered.  
The procedure for obtaining service and support, and the applicability of this 

warranty, will vary depending on the country or jurisdiction in which you 
purchase and utilize the product. For details on obtaining product service, 
support and other warranty information please visit 

www.cobrawalkietalkie.com

.

This warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state and country to country.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, ALTIS MAKES NO 
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE.  ALTIS EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN 
THIS LIMITED WARRANTY.  ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED 
BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESSED WARRANTY.  
LIMITATION OF REMEDIES AND DAMAGES.  REPAIR OR REPLACEMENT AS 
PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE 
CONSUMER.  ALTIS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ATTORNEYS’ 
FEES AND/OR COSTS OF LITIGATION, FOR BREACH OF ANY EXPRESS OR 
IMPLIED WARRANTY ON THIS PRODUCT.  ALTIS IS NOT LIABLE FOR ANY 
DAMAGES CAUSED BY THE PRODUCT OR BY THE PRODUCT TO PERFORM, 
INCLUDING ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES, OR 
CONSEQUENTIAL DAMAGES.  ALTIS IS NOT LIABLE FOR ANY CLAIM MADE BY A 
THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY.  THIS LIMITATION APPLIES 
WHETHER DAMAGES ARE SOUGHT, OR A CLAIM MADE, UNDER THIS WARRANTY 
OR AS A TORT CLAIM (INCLUDING NEGLIGENCE OR STRICT PRODUCT LIABILITY), 
A CONTRACT CLAIM, OR ANY OTHER CLAIM.  THIS LIMITATION CANNOT BE 
WAIVED OR AMENDED BY ANY PERSON.  THIS LIMITATION OF LIABILITY WILL BE 
EFFECTIVE EVEN IF ALTIS OR AN AUTHORIZED REPRESENTATIVE OF ALTIS HAS 
BEEN ADVISED BY YOU OF THE POSSIBILITY OF ANY SUCH DAMAGES.   
Some states and countries do not allow limitations on how long an implied 

warranty lasts and do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitations may not apply to you. This 
warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state and country to country
Provided that the product was purchased from Altis itself or through its 
authorized reseller or agent and utilized in the U.S.A., Altis will, without charge, 
repair or replace, at its option, defective products, products or component parts 
upon delivery to the authorized Altis Global Limited Authorized Service Center, 
accompanied by proof of the date of first customer purchase, such as a 
duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for 
warranty service, but the return charges, to an address in the U.S.A, will be at 
Altis’ expense, if the product is under warranty.

For Products Purchased Outside the U.S.A.

Please contact your authorized local reseller or agent for warranty information.

Trademark Acknowledgement

Manufactured, distributed, or sold by Altis Global Limited, official licensee for 
this product. Cobra

®

, microTalk

®

, Nothing Comes Close to a Cobra

®

, and the 

snake design are registered trademarks of Cobra Electronics Corporation, USA. 
Cobra Electronics Corporation

 is a trademark of Cobra 

Electronics

 Corporation, 

USA. All other product or service names are the property of their respective 
owners. 

©Cobra Electronics Corporation, USA 2018. All rights reserved.

IMPORTANT NOTICE: 

WARNING: Changes or modifications to this unit not expressly approved by 

the party responsible for compliance could void the user’s authority to operate 

the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to 

the following two conditions: 1) This device may not cause harmful 

interference, and 2) this device must accept any interference 

received,including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits 

are designed to provide reasonable protection against harmful interference in 

a residential installation.  This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 

installation.  If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:
• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. 
Safety Information for microTALK

®

 Radios

Your wireless handheld portable transceiver contains a low power transmitter. 

When the talk button is pushed, it sends out radio frequency (RF) signals. The 

device is authorized to operate at a duty factor not to exceed 50%. In August 

1996, the Federal Communications Commissions (FCC) adopted RF exposure 

guidelines with safety levels for handheld wireless devices
Important
FCC RF Exposure Requirements: For body-worn operation, this radio has 

been tested and meets the FCC RF exposure guidelines when used with 

Cobra accessories supplied or designated for this product. Use of other 

accessories may not ensure compliance with FCC RF exposure guidelines. 

Use only the supplied antenna. Unauthorized antennas, modifications or 

attachments could damage the transmitter and may violate FCC regulations. 
Normal Position
Hold the transmitter approximately 2 inches from your face and speak in a 

normal voice, with the antenna pointed up and away.
FCC Part 15.21 Warning Statement-
NOTE:
 THE GRANTEE  IS  NOT RESPONSIBLE FOR ANY CHANGES OR 

MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY 

RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID 

THE   USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
IC RSS-GEN
This device complies with ISEDC license-exempt RSS standard(s). Operation 

is subject to the following two conditions: (1) this device may not cause 

interference, and (2) this device must accept any interference, including 

interference that may cause undesired operation of the device.
Under ISEDC regulations, this radio transmitter may only operate using an 

antenna of a type and maximum (or lesser) gain approved for the transmitter 

by ISEDC. To reduce potential radio interference to other users, the antenna 

type and its gain should be so chosen that the equivalent isotropically radiated 

power (e.i.r.p.) is not more than that necessary for successful communication. 
The applicant is responsible for providing proper instructions to the user of the 

radio device, and any usage restrictions, including limits of exposure 

durations. The user manual shall provide installation and operation 

instructions, as well as any special usage conditions, to ensure compliance 

with SAR and/or RF field strength limits. For instance, compliance distance 

shall be clearly stated in the user manual.

 

Radiation Exposure Statement:
Any Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.
For Remote controller, SAR tests are conducted using standard operating 

positions accepted by the FCC/ISEDC with the device transmitting at its 

highest certified power level in all tested frequency bands, although the SAR is 

determined at the highest certified power level, the actual SAR level of the 

device while operating can be well below the maximum value.
Before a new model device is available for sale to the public, it must be tested 

and certified to the FCC that it does not exceed the exposure limit established 

by the FCC/ISEDC, Tests for each device are performed in positions and 

locations (e.g. at the ear and worn on the body) as required by the 

FCC/ISEDC.
For body worn operation, this model device has been tested and meets the 

FCC/ISEDC RF exposure guidelines when used with an accessory designated 

for this product or when used with an accessory that Contains no metal and 

that positions the handset a minimum of 10 mm from the body.
Non-compliance with the above restrictions may result in violation of RF 

exposure guidelin es.

Plug the USB cable into USB-compatible 
power port, then, insert the Micro-USB's 
connector directly into the charging port 
located bottom side of the unit.
• It will take around 5 hours for a full charge.
• Recommend to power off the device during 

charging.

Micro-USB Charge Jack  

Battery Low Indicator

Low power : Red LED flashes every 5 seconds. Voice 
prompt "

Please charge

" will be heard approximately 30 

minutes before device automatically powers off. 

Battery Information 

The battery is not charged before delivery, so please charge the battery for your first use. If the battery is not used 
for a long time or the battery is used up, please charge it before use. Charge / discharge for twice or three times 
alternately to achieve its optimal performance.
Note:
• Do not cause any short circuit on the battery or throw the battery into fire.
• When charging, please make sure the radio is powered off to guarantee it can be fully charged.
• Do not leave the radio or battery on the charger after it is fully  charged. Unnecessary constant charging will 

shorten the battery life.

• Do not put the fully-charged battery to re-charge, or it may shorten the battery life.
• Please try to keep the battery in an indoor environment at around 25°C. The battery may get easily spoiled after 

being kept in the environment below -10°C for a long time.

• In temperatures higher than 35°C or below -10°C, the dischargeable power of the battery may decrease due to 

the physical property of lithium battery. 

LED indicator

Talk

Button

Range: Up to 12 miles. Maximum range may vary and is based on 
unobstructed line-of-sight communication under ideal conditions.   

When you press and hold 

Talk

 button  Green LED on

Standby Mode 

Green LED flashes every 5 sec

Power Off the Device during charging 

Under Charging 

solid Red (No flash)

Fully Charge 

solid Green (No flash)

Volume/ 

Channel

(+) and (–) 

Buttons

Reviews: