WinSystems EBC-C413 Product Manual Download Page 6

Page: 6 / 83

EBC-C413/Introduction

v1.2

www.winsystems.com

Page 6

Introduction

This manual provides configuration and usage information for the EBC-

C413. The EBC-C413 is a full-featured embedded single board computer

(SBC) with digital I/O. If you still have questions after reviewing this

manual, contact WINSYSTEMS Technical Support at (817) 274-7553,

Monday through Friday, between 8 AM and 5 PM Central Standard Time

(CST).

Refer to the WINSYSTEMS website for other accessories (including cable

drawings and pinouts) that can be used with your EBC-C413.

Functionality

The EBC-C413 is a full-featured, EBX-compatible, embedded single board

computer (SBC) that supports Linux, Windows

10 desktop, Windows 10

IoT, and other x86-compatible real-time operating systems. Refer to

“Features” on page 6 and “General Operation” on page 9 for additional

information.

NOTE WINSYSTEMS can provide custom configurations for Original Equipment

Manufacturer (OEM) clients. Contact an Application Engineer through

technical support for details (see the Introduction paragraph on this page

for details).

Features

This section describes the features of the EBC-C413.

Single Board Computer

• EBX-compatible single board computer (SBC) with stacked PC104-Plus

connectors

• Soldered-down multi-core Intel

Atom™ E3800 processor. Available

options:
– E3815 single-core, 1.46 GHz
– E3827 dual-core, 1.33 GHz
– E3845 quad-core, 1.91 GHz

Operating Systems

(compatible)

• Windows Embedded 7, 8, and 8.1
• Windows 7, 8, and 10 (32/64-bit)
• Linux
• Other x86-compatible systems

Summary of Contents for EBC-C413




















































































Search results

Summary of Contents for EBC-C413

Reviews:

Related manuals for EBC-C413

Brands by name

Popular brands

WinSystems EBC-C413, Product Manual

Search results

Summary of Contents for EBC-C413

Reviews:

Related manuals for EBC-C413

Brands by name

Popular brands