Winget Crocker RP1500XD, Parts & Operation Manual

Page: 21 / 122

The system is factory calibrated and any variation between the calculated tare
and the actual tare recorded can be corrected by means of the tare adjustment
knob on the side of the gauge.
With no load acting on the loadcell the pointer will be below zero, this is to
accommodate the weight of the hopper. When the hopper is placed on to the
loadcell the pointer will register zero. Final zero adjustment can be made via
the zero adjustment knob on the side of the gauge housing.
ELECTRONIC LOADCELL & GAUGE
The electronic Loadcell & Gauge consists of an electrically operated loadcell
mounted on the weigher frame and connected to a remote mounted digital
readout control box. The connecting lead should be protected from damage
and the readout box mounted such that it is not affected by vibrations etc. The
mounting instructions detailed within Section 9 of this manual should be
followed to avoid excess vibrations damaging the control box. Section 9 also
contains detailed advice on setting up, obtaining zero and operation of the
loadcell and readout box and should be referred to before the equipment is
operated.
NOTE THE FOLLOWING WIRING CONNECTIONS
+ Excite RED
- Excite BLUE
+ Signal GREEN
- Signal YELLOW
OPERATING INSTRUCTIONS FOR 0-100 LITRE
WATER FLOWMETER
The simple manually operated 0-100 litre Water Flow Meter is available as an
option to the water tank and is normally mounted on the side of the mixer
feeding directly into the pan. The meter is normally fitted with 1” hose tail
connectors but different sizes of water inlet connections to suit various hose
diameters are also available. The meter is normally provided with a simple
‘on/off’ valve and inline filter/strainer mounted next to but down stream of the
flowmeter.
OPERATION
On a daily basis before use the strainer should be removed and checked for
debris and obstructions, cleaned and refitted. Ensure the on/off valve is in the
‘off ‘ position and turn on the main water supply. Set the adjustable pointer on
the dial face via the central knob to the required amount of water. Check the