Winget Crocker RP1500XD, Parts & Operation Manual

Page: 10 / 122

6.4
Shut off water supply and drain off water tank or flowmeter
MAINTENANCE
7.1 Ensure that all maintenance is carried out in accordance with the Parts and
Operating manuals and proprietary manufacturer’s specific instruction.
7.2 Isolate electrical and other services to the mixer as section 6 above.
7.3 Service at recommended intervals.
7.4 Use Croker manufactured replacement parts supplied by WINGET LIMITED .
GENERAL
8.1 Under no circumstances should the Maximum Batch Loads be exceeded by
either weight and volume as stated in Technical Specification.
8.2 Mixer star blades to be checked daily for damage.
8.3 Pan rim and base wearing plates must be replaced before excessive wear causes
distortion.
8.4 Ensure mixing pan is rotating concentrically and pan base is rotating in
horizontal plane.
8.5 Mixer must not be stopped and started when there is mix in the pan.
8.6 Refer to Contract Drawing for scope of supply. Site instruction notes outlining
weights etc.
8.7 Refer to Method Statement when installation and commissioning is
responsibility of Winget Limited.
Nett Weights Max (kgs)
9.1 RP50XD 788 RP1250XD 4840
RP100XD 814 RP1500XD 4980
RP200XD 1400 RP3000XD 7112
RP400XD 2000 FP1000 4040
RP550XD 2150 FP1500 4065
RP850XD 2600 FP2000 4100
9.2 Refer to technical specification for nett weights of ancillary equipment.
9.3 Refer to contract drawing for nett weights of ancillary equipment.