5
1.
Important initial information for the Technician
1.3 Boiler room/Installation room
– The minimum clearances for connections, cleaning and maintenance must be complied with – see section 2.4.3
Minimum service clearances.
– Sufficient ventilation of the set-up area must be assured. See section 2.2.9 Combustion air.
– The boiler must be installed in dry premises!
– The boiler may not be installed in rooms that are very dusty or humid.
Permissible limit values:
Air humidity: 85 % at room temperature of 25 °C (non-condensing)
Room temperature: +2 to +40 °C
Attention!
The configuration of the entire system must comply with the requirements of regional legislation,
applicable regulations, standards and guidelines.
1.4 Initial start-up and operating instructions
Windhager Customer Service or the customer service partner will start up the boiler first of all, and will familia-
rise the customer with the system operation and cleaning of the boiler, with reference to the Operating Manual.
The following preconditions must be met before you order the initial start-up:
1.) Boiler installed correctly.
2.) System fully wired up electrically.
3.) System rinsed, filled and vented – heat consumption must be possible.
4.) Boiler connected to domestic water and filled.
5.) Sufficient quantity of fuel available (pellets, oil, gas, slit logs).
6.) The customer must be present during start-up.
The initial start-up cannot be carried out if any of these points are neglected. The customer will be charged
for any unnecessary costs arising as a result.
Start-up and maintenance by Windhager Customer Service or a customer service partner are part of the gua-
rantee requirements of the enclosed “guarantee limitations”.
Note!
When the boiler is heated up for the first time, bad smells may result from gas emissions from in-
sulation or paint residue being burnt off. Ensure that the boiler room/installation room is therefore
well vented. Condensation may also form near the coasting surfaces and the combustion chamber
temperature may only increase after a delay.
