21
2.
For the Installer
2.4.15 Installing insulation for the rear panel
– Install insulation on top and bottom as shown in Fig. 37.
Fig. 37 Installing insulation on the rear panel
Fig. 38 If no adapter for the flue connection is be-
ing used, break off the cut-out
2.4.16 Installing the rear panels
– If no adapter for the flue gas blower (accessories) is being used, break off the cut-out at the top of the back
panel – Fig. 37.
large cut-out = exhaust pipe insulated
small cut-out = exhaust pipe not insulated
do not break off = adapter for flue connection installed
– Fasten the rear panel at top and bottom with 4 screws each – Fig. 39.
– Connect the blower plug to the flue gas blower – Fig. 39.
Fig. 39 Fitting the rear panels
4 each of
4 each of
Blower plugs
