16
WILO SE 06-2016 V5.0 DIN A4
English INTRODUCTION
1. Introduction
1.1. About this document
The language of the original operating instruc-
tions is German. All other languages of these
instructions are translations of the original oper-
ating instructions.
This manual is divided into individual sections,
which are listed in the table of contents. Each
section has a meaningful heading which clearly
describes its content.
1.2.
Personnel qualifications
All personnel who work on or with the aeration
system must be qualified for such work. All per
-
sonnel must be of legal age.
Operating and maintenance personnel must also
observe national accident prevention regulations.
It must be ensured that personnel have read and
understood the instructions in this operating and
maintenance manual; if necessary, this manual
must be ordered from the manufacturer in the
required language.
This aeration system is not designed to be used
by persons (including children) with impaired
physical, sensory or mental capabilities or who
have insufficient experience or knowledge to
operate the unit.
Children should be supervised to ensure that they
do not play with the aeration system.
1.3.
Copyright
This operating and maintenance manual has been
copyrighted by the manufacturer. The operating
and maintenance manual is intended for use by
installation, operating and maintenance person-
nel. It contains technical regulations and draw-
ings which may not be reproduced or distributed,
either completely or in part, or used for purposes
of competition, or shared with others without
the express consent of the manufacturer. The
illustrations used may differ from the original and
are intended merely as an example representation
of the aerator.
1.4. Subject to change
The manufacturer reserves the right to make
technical modifications to systems and/or com
-
ponents. This operating and maintenance manual
refers to the aerators shown on the title page.
1.5. Warranty
In general, the specifications in the current “Gen
-
eral Terms and Conditions” apply to the warranty.
You can find these here:
www.wilo.com/legal
Any deviations must be contractually agreed and
shall then be given priority.
1.5.1. General
The manufacturer is obliged to correct any de-
fects found in the aerator it sells, provided that
the defects meet one or more of the following
requirements:
• The defects are caused by the materials used
or the way the product was manufactured or
designed.
• The defects were reported in writing to the
manufacturer within the agreed warranty period.
• The aerator was used only as intended.
1.5.2. Warranty period
The duration of the warranty period is stipulated
in the “General Terms and Conditions”.
Any deviations must be contractually agreed!
1.5.3.
Spare parts, add-ons and modifications
Only genuine spare parts from the manufacturer
may be used for repairs, replacements, add-ons
and modifications. Unauthorised attachments and
modifications, or the use of non-genuine parts,
can lead to severe damage to the aerator and/or
to personal injury.
1.5.4. Maintenance
The prescribed maintenance and inspection
work should be carried out regularly. This work
may only be carried out by qualified, trained and
authorised personnel.
1.5.5. Damage to the product
Damage and malfunctions that endanger safety
must be eliminated immediately by trained per-
sonnel. The aerator may only be operated if it is in
perfect technical working order.
In general, repairs should only be carried out by
Wilo customer service!
1.5.6. Exclusion from liability
No warranty is granted and no liability is accepted
for damage to the aeration system if one or more
of the following apply:
•
Inadequate configuration by the manufacturer
due to the information provided by the operator
or customer being insufficient or incorrect
• Sewage and air side fouling or scaling effects
• Non-compliance with safety instructions and
working instructions as specified in this operating
and maintenance manual
• Improper use
• Incorrect storage and transport
• Improper installation/dismantling
•
Insufficient maintenance
• Incorrect repairs
• Inadequate construction site or construction work
•
Chemical, electrochemical and electrical influ
-
ences
• Wear
This means the manufacturer’s liability excludes
all liability for personal injury, material damage or
financial losses.
2. Safety
This section lists all the generally applicable
safety instructions and technical information. In
addition, all the other sections contain specific
safety instructions and technical information. All
