Wilbar Optimum Pool Round 95-0770, General Instructions Manual

Page: 29 / 51

Section 2
Step 4
– Anchor Plate Installation (Continued)
27
4.4 Two Anchor Plates included with the pool have only one
mounting hole as pictured in figure 4.5. These are to be
used on the filler panels at the step void. There is a
specific left and right Anchor Plate for these two locations
(Figure 4.4).
4.5 Drill one 7/16” hole through each filler panel at the
Bottom Plate hole location and secure with one 2-
1/2”
bolt (#99-0137) and nut (#99-0134).
Note
– Before final panel is attached, bring sand for
the floor base and cove into the interior of the pool.
(See Page 9 for proper quantities)
4.4
4.5
Section 2
FULLY IN-GROUND WITH POLYMER STEP
FULLY IN-GROUND STEP