background image

Aqua Vac Pool Cleaners, Inc.
1711 Longwood Road
West Palm Beach, FL 33409

Attn: Warranty Records

PLACE 

STAMP 

HERE

Mail today to –

Fold, stamp and mail or fax to 561-688-0217 or register on the web at www.aquavacsystems.com

Serial #_______________________________________________________TigerShark

(Located inside filter area)

Registration of Warranty

This registration card must be mailed within 10 days of purchase to secure limited warranty.

FOR USE IN THE U.S.A. ONLY.

Name_____________________________________________________________________________________ 

Address___________________________________________________________________________________ 

City________________________________________________State___________Zip ____________________

Date Purchased____________________________________________________________________________ 

Is this replacing another pool vacuum?     Yes____    No____    If yes, what brand?______________________ 

Purchased from____________________________________________________________________________ 

City________________________________________________State___________Zip ____________________

The size of my pool surface is___________x__________   Surface is__________________________________

Have you seen us on the internet?    Yes____     No____

   

Summary of Contents for TigerShark





















Reviews: