Section 3
Section 2
Step 13
– Add Water
40
13.1 Start filling the pool with water once the concrete has cured,
if applicable.
Once the water level reaches 2-
3” below the Return Fitting,
install the Faceplates on the Return Fitting and Skimmer as
shown in Figures 14.1 and 14.2.
When Faceplates are installed, complete filling the pool
until water level is at the middle of the Skimmer opening.
Step 14
– Install Face Plates
14.1
14.2
Locate skimmer and return screw holes through the pool
liner. Carefully pierce liner through the screw holes with a
nail or awl. Attach Skimmer and Return Faceplates using
screws provided in the Skimmer Kit and tighten.
Using a sharp blade, carefully cut away liner inside the
Skimmer and Return openings. Install eyeball (not included)
into Return Fitting.
14.1
14.2
FINISHING THE POOL
OPTIMUM ROUND POOL
Summary of Contents for Optimum Pool Round 95-0770
