Wilbar Optimum Pool Round 95-0770, General Instructions Manual

Page: 40 / 51

Section 3
38
10.5
10.6
CP2 END CAPS
#77268
A CP2 transition kit is available (#77268) for pools that are
installed into a hillside and will utilize both 2” PVC Top Coping
and in-ground CP2 coping. This kit includes two stainless steel
plates to give a finished end to the CP2 coping.
Bend the lower tab of the End Plate slightly past 90 degrees in
the appropriate direction.
Attach the End Plate with #10 x ¾” Tek Screw (#99-0090)
through the CP2 coping and into the Coping Adaptor Clip
(#77176). Repeat at opposing end.
10.5
10.6
FINISHING THE POOL
OPTIMUM ROUND POOL
Step 10 - Installing Top Coping (Continued)