Wilbar Optimum Pool Round 95-0770, General Instructions Manual

Page: 35 / 51

Section 2
Step 7
– Concrete Collar
33
7.1 Use the included step footprint for the specific pool size to
ensure the layout dimensions are correct and adjust
accordingly. Distance between all panel joints should be
identical.
7.2 Make sure the supplied 3/8” x 15” rebar (#77001) is
inserted halfway into the ground through every Anchor
Plate hole around the perimeter of the pool. Also insert
two lengths of rebar through the hole on the A-frame
assembly from Step 5.5. If extra supports are required for
patio or other pool features, consider installing them
before pouring the concrete.
Note - Double check the pool is level and square
before pouring concrete!
7.3 A concrete collar is required on all in-ground pools. Pour
8” high by 12” wide concrete collar around the perimeter
of the pool. Pour concrete foundation around the backside
of the step. (See footprint for recommended quantity)
Note: Do not fill with water until concrete has cured.
7.2
7.3
Section 2
FULLY IN-GROUND WITH POLYMER STEP
FULLY IN-GROUND STEP