33
6 Set up with the display and adjustment module
WIKA Operating Instructions - Process pressure transmitter CPT-2x
You can change your selection afterwards with the menu item "
Setup
- Display, Menu language
".
6.4 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select
the menu item "
Quick setup
" in the start graphic on the display and
adjustment module.
Select the individual steps with the
[->]
key.
After the last step, "
Quick setup terminated successfully
" is displayed
briefly.
The return to the measured value indication is carried out through the
[->]
or
[ESC]
keys or automatically after 3 s
Note:
You can find a description of the individual steps in the quick setup
guide of the sensor.
You can find "
Extended adjustment
" in the next sub-chapter.
6.5 Parameter adjustment - Extended adjustment
For technically demanding measuring points, you can carry out
extended settings in "
Extended adjustment
".
The main menu is divided into five sections with the following func
-
tions:
Setup:
Settings, e.g., for measurement loop name, application, units,
position correction, adjustment, signal output
Display:
Settings, e.g., for language, measured value display, lighting
Diagnosis:
Information, e.g. on instrument status, pointer, measure-
ment reliability, simulation
Additional adjustments:
PIN, date/time, reset, copy function
Info:
Instrument name, hardware and software version, date of manu-
facture, device ID, sensor features
Note:
For optimum adjustment of the measuring point, the individual sub-
menu items in the main menu item "
Setup
" should be selected one
Main menu
