32
6 Set up with the display and adjustment module
WIKA Operating Instructions - Process pressure transmitter CPT-2x
– Select editing position
•
[+]
key:
– Change value of the parameter
•
[ESC]
key:
– Interrupt input
– Jump to next higher menu
The instrument is operated via the four keys of the display and
adjustment module. The individual menu items are shown on the LC
display. You can find the function of the individual keys in the previous
illustration.
When the
[+]
and
[->]
keys are pressed quickly, the edited value,
or the cursor, changes one value or position at a time. If the key is
pressed longer than 1 s, the value or position changes continuously.
When the
[OK]
and
[ESC]
keys are pressed simultaneously for more
than 5 s, the display returns to the main menu. The menu language is
then switched over to "
English
".
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Measured value indication
With the
[->]
key you can move between three different indication
modes.
In the first view, the selected measured value is displayed in large
digits.
In the second view, the selected measured value and a correspond-
ing bargraph presentation are displayed.
In the third view, the selected measured value as well as a second
selectable value, e.g. the temperature, are displayed.
With the "
OK
" key you move (during the initial setup of the instrument)
to the selection menu "
Language
".
In this menu item, you can select the national language for further
parameterization.
With the "
[->]
" button, you can select the requested language, with
"
OK
" you confirm the selection and move to the main menu.
Adjustment system
Time functions
Measured value indica-
tion
Selection language
