All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
36
8.0 Maintenance
8.5. Changing the oil of the gear unit
•
Place the collecting trough
beneath drain screw (A).
•
Remove the drainscrew (A)
•
When the gear unit is empty,
insert the drain screw and
tighten it.
•
Remove the exhaust filter
and the fuel level plunger(E}.
•
Insert the funnel into the
opening
↓
.
•
Add the required amount
of oil.
•
Insert the screw (E) and
tighten.
Type Amount
of
oil
Type
of oil
G6 / 135
G6 / 160
3.0 liters
(0.8 US.gal.)
SAE 90
8.6. Replacing the buffers
ATTENTION
Tine holders are under
spring-tension. Risk of
injuries caused by
backwards swinging tines.
1.
Swing tine holder (A)
by hand up to stop,
2.
remove the screw(B),
3.
replace the buffer (C),
4.
tighten the screw (B),
5.
Swing back tine
holder (A) carefully
to working position.
