All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
22
6.0. Before Operation
6.2. Indicating and adjustment elements
Shift lever(A) for the
3 gear speeds of the machine
(speed 3 is seen on the
photo 434.12).
NOTE:
The shift lever (A) must snap
into place with an audible
sound. If necessary move the
gear by applying pressure to
a tine holder while standing up
Crank (B) for adjusting the
working depth (by raising or
lowering the roller).
Scale (C) for tool length;
depth scale (H) to read the set
operating depth;
ruler (D) and pointer (G)
Crank (E) and spindle (F) for
adjusting the entry angle.
