All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
27
6.0. Before Operation
6.4. Adjusting the GREENS TERRA SPIKE
2)Release the stop-motion device
of the trailing cylinder, for
this end plug the pin (A) into
the hole(C).
3)Lower the GREENS TERRA SPIKE
onto a cylinder feeler.
4)Put the GREENS TERRA SPIKE
into a vertical position,
for this end:
• release the lock nut (D)
• adjust through the crank (E)
ADJUSTMENT:
the front edge (V) must be
placed vertically
• draw up the lock nut (D)
of the above pull rod.
5)The hoeing effect of the
tools in the ground is
achieved by the crank (G)
and the spindle (H).
We recommend using a
position from 0 to 15.
←
Position 0
↑
Position 5
→
Position 10
↓
Position 15
6)For working with hollow
tines we recommend putting
the trailing cylinder upright;
for this end:
•
Raise the GREENS TERRA SPIKE
•
Lift off the trailing cylinder
by hand
•
Release pin (A) and plug it
into the lowest hole of
the adjusting strap (F).
