background image

All information, illustrations and specifications in this manual are based on the latest information  

available at the time of publication. We reserve the right to make changes at any time without notice.

 

7

1.0. Safety 

Observe road traffic regulations 

Always observe local road traffic 
regulations when using public 
roads. 
 
 
 
 
 

Wear protective clothing 

Wear close fitting clothing and 
personal protective equipment 

appropriate to the job. 
Prolonged exposure to loud noise 

can cause impairment or loss of 
hearing.  
Wear a suitable hearing 
protective device such as 

earplugs to protect against 
objectionable or uncomfortably 
loud noises. 
Operating equipment safely 
requires the full attention of 

the operator.  
Do not wear radio or music 

headphones while operating the 
machine. 

 

 

 

Stay clear of rotating drive shafts 

Entanglement in a rotating 

drive shaft may cause serious 
injury or death. 
Keep all drive shaft guards in 
place at all times. Make sure 

rotating shields can turn 
freely. Wear close-fitting 

clothing. Stop the engine and 
make sure PTO shaft is stopped 
before making adjustments, 

connections, or cleaning out 
PTO-driven equipment. 

Summary of Contents for Greens Terra Spike G6/135















































Reviews: