All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
18
4.0. Connecting to the Tractor
4.2. Connecting to the tractor
Prerequisite for connecting:
•
a three-point hitch.
NOTE:
if possible use the lower
location hole for mounting
the lower guide rod.
This provides the maximum
lifting distance.
observe the bending angle
of the PTO shaft.
Mounting steps:
1.
Mount the lower guide
rod by:
inserting the bolt(1) and
locking it with the o-ring(2).
2.
Mount the upper guide
rod by:
Inserting the bolt(3) and
locking it with the
locking pin.
3.
Tighten the tension jack(5)
of the stabilizing chain.
4.
Adapt the PTO shaft
(see separate operating
instructions).
5.
Mount the PTO shaft by
pushing in the slide pin
of the PTO shaft,
slipping on the PTO
shaft, secure the PTO
shaft protector against
rotating with the shaft.
CAUTION - DANGER !
Check for correct connection
before starting operation.
