All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
24
6.0. Before Operation
6.3.1. Mounting the tines into the receiver:
1.
Shift up the
tine holder(A).
2.
Screw (D) and
washer (E) remove.
3.
Adjust nut (B) with
delivered wrench so that
you can see one
thread (C) of the tine.
4.
Place tine (F) into the
conical support and
bolt it completely into
nut (B).
5.
Check point of tine
to make sure it is backwards
to driving direction.
6.
By removing the tines (F)
adjust position edge.
7.
Put wrench on nut (B).
8.
Hold tine with one
hand firmly.
9.
Fix tine by bolting
the nut (B).
NOTE
Check all tines for tight fit:
•
Before using them
•
If they just have been
mounted, after three
minutes of use.
A
A
F
D
E
Fahrtrichtung
Direction of motion
Direction de la marche
Sentido de la marcha
Direzione di marcia
Rijrichting
100.22
B
C
