WhitakerAudio 60 W Stereo Power Amplifier, User And Assembly Manual

Page: 64 / 154

64
WhitakerAudio
– Connect XFMRCT – output transformer center tap. Find the red wire from the right
channel output transformer. Install a connector to the end of the wire. Attach to the
XFMRCT post on the right channel PWB.
Double-check the connections from the right channel output transformer to the PWB.
5.4.9.2 Left Channel Output Transformer Primary Leads
In the following steps, trim the transformer lead lengths so the wires will comfortably reach their
respective terminals. Note that the sleeving containing the primary leads from T1 will rest against
the bottom chassis plate. Use the red terminal connectors. After each terminal is attached to a
lead, gently pull on the wire and terminal to make sure a good crimp has been made.
– Connect PL1 – output transformer plate 1 connection. Find the blue wire from the left
channel output transformer (T1). Install a connector to the end of the wire. Attach to the
PL1 post on the left channel PWB.
– Connect SC1 – output transformer screen 1 connection. Find the blue/yellow wire from
the left channel output transformer. Install a connector to the end of the wire. Attach to the
SC1 post on the left channel PWB.
– Connect PL2 – output transformer plate 2 connection. Find the brown wire from the left
channel output transformer. Install a connector to the end of the wire. Attach to the PL2
post on the left channel PWB.
– Connect SC2 – output transformer screen 2 connection. Find the brown/yellow wire from
the left channel output transformer. Install a connector to the end of the wire. Attach to the
SC2 post on the left channel PWB.
– Connect XFMRCT – output transformer center tap. Find the red wire from the left
channel output transformer. Install a connector to the end of the wire. Attach to the
XFMRCT post on the left channel PWB.
Double-check the connections from the left channel output transformer to the PWB.
Route the secondary leads from the output transformers toward the back panel; they will be
connected later.