WhitakerAudio 60 W Stereo Power Amplifier, User And Assembly Manual

Page: 31 / 154

31
60 W Stereo Power Amplifier
– Install R5 – 10
Ω
, 0.5 W . Solder in place.
– Install R6 – 182 k
Ω
, 0.5 W . Solder in place.
– Install R7 and R8 – 15 k
Ω
, 2 W . Solder in place, providing about ½-inch clearance above
the board.
– Install R9 – 470
Ω
, 2 W . Solder in place, providing about ½-inch clearance above the
board.
– Install R10 – 22 k
Ω
, 0.5 W . Solder in place.
– Install R11 – 2.2 k
Ω
, 2 W . Solder in place, providing about ½-inch clearance above the
board.
– Install R12 and R13 – 100 k
Ω
, 0.5 W . Solder in place.
Figure 5.1 Recommended procedure for mounting the quick-disconnect tabs on the PWB: ( a )
insert the tap using pliers and carefully work it into the board, ( b ) position the tab so it is
perpendicular to the board, ( c ) check to make certain that the mounting pins extend outside the
foil side of the board, ( d ) solder in place.
( a ) ( b )
( c ) ( d )