Whirlpool WED99HEDC0, Technical Education

Page: 28 / 100

3-2
n
HybridCare™ Dryer with Heat Pump Technology
INSTALLATION
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Tools needed:
Parts package is located in dryer drum. Check that all parts are
included.
NOTE: Do not use leveling legs supplied with dryer if installing
with a pedestal or a stack kit.
If using a power supply cord:
Use a UL listed power supply cord kit marked for use with
clothes dryers. The kit should contain:
n
A UL listed 30-amp power supply cord, rated 120/240 volt
minimum. The cord should be type SRD or SRDT and be
at least 4 ft. (1.22 m) long. The wires that connect to the
dryer must end in ring terminals or spade terminals with
upturned ends.
n
A UL listed strain relief.
Additional Accessories: (Not supplied with dryer)
Refer to your Use and Care Guide for information about
accessories available for your dryer.
Installation Requirements Location Requirements
"EKVTUBCMFXSFODIUIBU
PQFOTUPß NNPS
IFYIFBETPDLFUXSFODI
ßBOEßOVUESJWFS
SFDPNNFOEFE
6UJMJUZLOJGF 5BQFNFBTVSF
-FWFMJOHMFHT
1BSUTQBDLBHFJTMPDBUFEJOESZFSESVN$IFDLUIBUBMMQBSUT
BSFJODMVEFE
/05&
%POPUVTFMFWFMJOHMFHTTVQQMJFEXJUIESZFSJGJOTUBMMJOH
XJUIBQFEFTUBMPSBTUBDLLJU
*GVTJOHBQPXFSTVQQMZDPSE
6TFB6-MJTUFEQPXFSTVQQMZDPSELJUNBSLFEGPSVTFXJUI
DMPUIFTESZFST5IFLJUTIPVMEDPOUBJO
■
"6-MJTUFEBNQQPXFSTVQQMZDPSESBUFEWPMU
NJOJNVN5IFDPSETIPVMECFUZQF43%PS43%5BOECF
BUMFBTUGU NMPOH5IFXJSFTUIBUDPOOFDUUP
UIFESZFSNVTUFOEJOSJOHUFSNJOBMTPSTQBEFUFSNJOBMT
XJUIVQUVSOFEFOET
■
"6-MJTUFETUSBJOSFMJFG
"EEJUJPOBM"DDFTTPSJFT
/PUTVQQMJFEXJUIESZFS
3FGFSUPZPVS6TFBOE$BSF(VJEFGPSJOGPSNBUJPOBCPVU
BDDFTTPSJFTBWBJMBCMFGPSZPVSESZFS
1BSUTTVQQMJFE
h NNESBJO
IPTFXJUIDPVQMFST
5SJBOHVMBSFOE
DBCMFUJFT
$BCMFUJFT
Location Requirements
$IFDLDPEFSFRVJSFNFOUT4PNFDPEFTMJNJUPSEPOPUQFSNJU
JOTUBMMJOHESZFSJOHBSBHFTDMPTFUTNPCJMFIPNFTPSTMFFQJOH
RVBSUFST$POUBDUZPVSMPDBMCVJMEJOHJOTQFDUPS
:PVXJMMOFFE
■
"TFQBSBUFBNQDJSDVJU
■
*GVTJOHQPXFSTVQQMZDPSEBHSPVOEFEFMFDUSJDBMPVUMFU
MPDBUFEXJUIJOGU NNPGFJUIFSTJEFPGESZFS4FF
i&MFDUSJDBM3FRVJSFNFOUTw
■
'MPPSNVTUTVQQPSUESZFSXFJHIUPGMCT LH"MTP
DPOTJEFSXFJHIUPGDPNQBOJPOBQQMJBODF
■
-FWFMnPPSXJUINBYJNVNTMPQFPGß NNVOEFSFOUJSF
ESZFS*GGPSXBSETMPQFJTHSFBUFSUIBOß NNXBUFSDPVME
SVOPVUGSPNGSPOUPGmMUFS*OTUBMM&YUFOEFE%SZFS'FFU,JU1BSU
/VNCFS*GOPUMFWFMDMPUIFTNBZOPUUVNCMFQSPQFSMZ
BOEBVUPNBUJDTFOTPSDZDMFTNBZOPUPQFSBUFDPSSFDUMZ
■
'PSHBSBHFJOTUBMMBUJPOQMBDFESZFSBUMFBTUß NN
BCPWFnPPS*GVTJOHBQFEFTUBMZPVXJMMOFFEß NN
UPCPUUPNPGESZFS
■
5IFESZFSNVTUOPUCFJOTUBMMFEPSTUPSFEJOBOBSFBXIFSFJU
XJMMCFFYQPTFEUPXBUFSBOEPSXFBUIFS
*.1035"/5 %POPUPQFSBUFJOTUBMMPSTUPSFESZFSXIFSF
JUXJMMCFFYQPTFEUPXBUFSXFBUIFSPSBUUFNQFSBUVSFTCFMPX
™' ™$-PXFSUFNQFSBUVSFTNBZDBVTFESZFSOPUUP
TIVUPGGBUFOEPGBVUPNBUJDTFOTPSDZDMFTSFTVMUJOHJOMPOHFS
ESZJOHUJNFT
%3:&3%*.&/4*0/4
27"
(686 mm)
38
3
/
4
" Min.
(984 mm)
39" Max.
(990 mm)
'SPOUWJFX
-FWFM 1MJFST
Flat-blade screwdriver #2 Phillips screwdriver
Wire stripper Channel locks
1/4” & 5/16” nut driver Adjustable wrench
Utility knife Tape measure
Level Pliers
Leveling legs (4) 6’ drain hose
Cable ties (3) Cable ties (2)
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.