Whirlpool WED99HEDC0, Technical Education

Page: 63 / 100

COMPONENT ACCESS
HybridCare™ Dryer with Heat Pump Technology
n
4-15
Removing the Rear Panel
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
To Remove the Rear Panel
1.
Unplug dryer or disconnect power.
2. Remove drain hose from standpipe or laundry tub.
3.
Remove the 5/16” hex-head screw securing the terminal
block cover to the rear panel. Remove the cover (see
Figure 1).
Figure 1
4. Remove the 1/4” hex-head screw securing the auxiliary
fan guard to the rear panel. Remove the fan guard (see
Figure 2).
Figure 2
5. Remove the fifteen (15) 1/4” hex-head screws securing
the rear panel to the dryer (see Figure 3).
Figure 3
6. Lift up rear panel up and away from dryer base and set
aside.
Sump Drain Port
Auxiliary Fan Guard
Terminal Cover