Whirlpool ACP102PR, Manual

Page: 31 / 64

4-5
REMOVING THE LOUVER MOTOR & RECEIVER BOARD
1. Unplug air conditioner or disconnect power.
2. Remove the cabinet from the unit (see
page 4-2 for the procedure).
3. Remove the seven cover screws, and the
green ground wire screw and lockwasher
from the components cover, and remove
the cover.
b) Remove the two screws from the lou-
ver motor and remove the motor.
6. To remove the receiver board:
a) Disconnect the board connector CN20
from the control board (see the top
photo).
b) Remove the two screws from the re-
ceiver board and remove the board.
Screws
Screws
Components Cover
Louver Motor Receiver Board
4. Cut the wire tie for the louver motor, or
the two wire ties for the receiver board
(see the top right photo).
5. To remove the louver motor:
a) Disconnect the motor wire connector
CN13 from the control board.
Receiver Board Ties
CN13
CN20
Louver Motor Screws
Louver Motor Tie
Receiver Board
Receiver Board Screws
REASSEMBLY NOTE: Be sure to replace the
wire ties that you removed with new ties, and
secure the wires neatly together.
Ground Wire Screw
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.