page A – 15
AM-55 / Sep 2015
A P P E N D I C E S
TCP Port setting so we can leave it set to 60021. Once
input to the dialog is finished, click on the
Ok button
and it will close.
Next we’ll open the System Crosspoint window and
see that our new AM‑55’s input and output signals are
now present and available for routing.
Note that as shown in the example below we’ve
used Navigator’s signal name editing capability to as‑
sign AM‑55’s input and output signals the names we
desire. Until changed the default names begin with
“AM55” and will be “AM55 Input” and “AM55 Out”.
Of course these signals may be
manually crosspointed (and locked
if desired!) to make connections, or
it may be done through the many
other methods available within the
WheatNet‑IP system for routing
signals and changing the routes of
both audio and logic signals.
More information on configuring
and using WheatNet‑IP Navigator
and the other features and capabilities
of the WheatNet‑IP system may be
found in the WheatNet‑IP BLADE3
Audio Over IP Network manual.
Assistance in configuring AM‑55 for WheatNet‑IP may be obtained by giving us a
call at 252‑638‑7000 or by emailing [email protected].
AM-55 / Apr 2016
