page 4 – 15
WheatNet-IP BLADE 3
/ Jan 2016
E T H E R N E T N E T W O R K S A N D S W I T C H E S
Hardware Status Indicators
Check that your hardware meets the following parameters
•
Switch LED’s – No Link LED’s: check wiring is CAT5e or better, check switch
port configuration is GbE compliant, patch cables, full duplex, certify wiring.
• NIC Issues – Confirm NIC’s are GigabitE, check IP config on PC.
•
BLADE 3 LED indicators – See Table Below.
STATUS LED
FUNCTION
Link
Shows network connectivity
Route Master
BLADE 3 has been voted route master for the
system
Clock Master
BLADE 3 has been voted the master clock
reference for the system
Error
Trouble with BLADE 3 configuration
Error Logs
In the WheatNet‑IP system there are several places you can view logs to aid in
troubleshooting. The PC GUI provides system wide logging to help pinpoint where a
problem may exist. The PC GUI also has an “Alarms” section that displays any message
that may require user attention such as silence detection notification.
PC GUI Log
Summary of Contents for WheatNet-IP BLADE3
