page A – 36
WheatNet-IP BLADE 3
/ Jan 2016
A P P E N D I C E S
click on “Load an Event”. This opens the Events list; select
“Morning” or whatever the name of your desired event
is and then click
APPLY
. Button #1 will now recall the
“Morning” event set up whenever it is pressed.
For the second example let’s make button #2 perform
a talkback function to a remote location, say destina‑
tion #5 in BLADE 2. We will make this work by mak‑
ing a temporary crosspoint connection of our talkback
signal (typically the talent mic), which in our example is
source #3 in BLADE 1, to destination #5 in BLADE 2.
A temporary connection in the WheatNet‑IP system is
where a destination’s normal audio source connection is
temporarily removed (normally for as long as a button
is held down) and a secondary connection is substituted.
Once the button is released, the secondary connection is
removed and the original one is restored.
From the control surface VGA display screen choose
Options>Programmable buttons. For button #2 choose
“Momentary/Surface LED” which is the default. This tells
the control surface that you want programmable button #2 to act as a momentary switch
(it stays engaged for only as long as the button is held down) and the switch indicator
LED is to be illuminated directly by
the surface for as long as the button is
held down.
We’ve told the surface how we want
the button to act; we must now tell it
what we want it to do. If not already
running, we must connect and start the
Navigator GUI software, because this
is where we’ll program the crosspoint
connections.
In the System Pane view, click on
the engine BLADE for our control sur‑
face to display the Blades tabs and click
on LIO Info tab. The LIO properties
window will open, showing a listing
of all the available logic signals for the
control surface.
Summary of Contents for WheatNet-IP BLADE3
