page A – 95
WheatNet-IP BLADE 3
/ Jan 2016
A P P E N D I C E S
Schedule Events
With a few events in the Event Manager list, your main screen,
Event Manager
tab,
could look like this:
With a single event highlighted, as shown, you can click
Schedule
, or select
Events>Schedule
, to schedule only that event. You could also highlight, using either the Shift
key or the Ctrl key, a small number of events, say two or three, and use Schedule to schedule
only those events. Or you can use the
Schedule All
button or select
Events>Schedule All
to
add all events in the list to the schedule; in this case you only need to highlight one event.
Delete Events
From the
Event Manager
list, you can highlight an event and click the
Delete
button or
select
Events>Delete
from the menu to delete that event. This will delete the event from
the
Event Manager
list and also delete any as yet unfired instances of the event from the
schedule:
Click
OK
to proceed, or
Cancel
if you’ve changed your mind.
Summary of Contents for WheatNet-IP BLADE3
