page A – 23
WheatNet-IP BLADE 3
/ Jan 2016
A P P E N D I C E S
page A – 22
Enter the following commands based on the OS versions of your switch:
•
OS any version prior to version 15.0
Interface gig 0/x (x=the Ethernet port being configured)
switchport mode access
switchport nonegotiate
switchport block multicast
no ip igmp snooping tcn flood
spanning-tree portfast
end
•
OS any version after 15.0
Interface gig 0/x (x=the Ethernet port being configured)
switchport mode access
switchport nonegotiate
no ip igmp snooping tcn flood
spanning-tree portfast
end
Ports on the Cisco Catalyst switches can be configured individually or in a “Range.” If
range is desired type
Interface range gig1/0/1-24
using the desire number of ports.
Configuring Gigabit Ports Connecting to Wheatnet IP Control
Surfaces, GP Panels, and XY Controllers
Enter the following commands based on the OS versions of your switch:
•
OS any version prior to version 15.0
Interface gig 0/x (x=the Ethernet port being configured)
switchport mode access
switchport nonegotiate
switchport block multicast
no ip igmp snooping tcn flood
spanning-tree portfast
end
•
OS any version after 15.0
Interface gig 0/x (x=the Ethernet port being configured)
switchport mode access
switchport nonegotiate
no ip igmp snooping tcn flood
spanning-tree portfast
end
Ports on the Cisco Catalyst switches can be configured individually or in a “Range.”
If range is desired type
Interface range gig0/1-24
using the desired number of ports.
WheatNet-IP BLADE 3
/ May 2018
Summary of Contents for WheatNet-IP BLADE3
