WheatNet-IP BLADE 3
/ June 2018
page A – 132
A P P E N D I C E S
It’s very important to notice that the translated 1ms stream has its own unique multicast
address, auto‑generated by WNIP. Make a note of this multicast address.
Also, you can click on this new stream and choose “Edit” if you need to change ports
to the default AES67 5004. There’s a practical reason to use 5004 as the port for AES67
streams even if your AES67 device does not require it. In the System View‑‑‑‑>Source
Streams window you can click on the “Port” column and the streams will be sorted by
port#. This allows you to quickly see all of your AES67 streams in one place which can
be handy in a system with hundreds of signals.
Set AES67 stream port, etc. here
Enter 1ms address and port here
Once you have configured the AES67 1ms stream, you just need to open a browser
window into the xNode and enter the multicast address for it into the xNode destinations
window and you’re all set as in Example 3. With devices that don’t require 1ms packet
timing we recommend that you stick to 1/4 ms for best latency performance; you’ll need
this translation technique only for devices like Dante that don’t support it.
Summary of Contents for WheatNet-IP BLADE3
