G E N E R A L I N F O R M A T I O N
page 1 – 16
WheatNet-IP BLADE 3
/ Jan 2016
WheatNet-IP BLADE 3
/ Mar 2019
for the second channel, and so on. In this mode, all inputs and outputs are configured as
stereo signals. Thus, in Stand alone mode, the Aura8ip BLADE 3 functions as eight in‑
dependent channels of stereo audio processing, four with analog inputs and outputs, and
the other four with digital inputs and outputs.
If the Mono, Stereo, or Custom template is selected when the BLADE 3 is configured,
the eight channels of audio processing are divorced from the unit’s input and output con‑
nections, and these inputs and outputs can then be routed to other BLADE 3s in the sys‑
tem. In this Networked mode the inputs of the eight audio processing channels become
destinations in the system, to which any available sources in the system can be routed.
Likewise, the outputs of the eight audio processing channels become sources in the system,
and may be routed to any available destinations.
Also in this Networked mode, signals wired to the BLADE 3’s input connections
become sources in the system and can be freely routed to any available destinations, which
can include the processing channel inputs if desired. Meanwhile, the BLADE 3’s output
connections become destinations to which any available system sources can be routed,
including the processing channel outputs, if so desired.
In the Networked mode the BLADE 3’s inputs and outputs can be configured as mono,
stereo, or any combination of mono and stereo required. Whether in Networked or Stand
alone mode the audio processing channels are always stereo in and out.
MADI - Multichannel Audio Digital Interface BLADE
The MADI BLADE is an access point on the WheatNet‑IP Intelligent Network,
converting a 64‑channel MADI input to data streams on the network, and converting data
streams to 64‑channel MADI outputs.
The MADI BLADE bridges the gap between any MADI‑capable audio gear or network
and the WheatNet‑IP Intelligent Network. With the MADI BLADE, users can add‑on
to their existing infrastructure to access audio via MADI with affordable and proven
WheatNet-IP equipment.
The MADI BLADE makes it possible for WheatNet‑TDM Gibraltar Network users to
use WheatNet‑IP control surfaces and BLADE 3s with their existing networks to access
up to 64 channels of audio. The added functionality and low cost of WheatNet‑IP make
this an exceptionally attractive offering. But its functionality is not limited to Wheatstone
systems. WheatNet‑IP can now put to use audio from ANY system that utilizes MADI.
The MADI BLADE supports either copper or fiber connectivity.
A pair of 75 ohm BNC connectors are provided on the rear panel and are labeled INPUT
and OUTPUT. All connections should be made with a high quality 75 ohm coaxial cable
terminated to male BNC connectors. By installing digital video grade coax, cable runs of
200M or more can be realized.
The MADI BLADE supports an optional fiber connection to the Bridge/Gibraltar
Network Router. The MADI BLADE uses an SFP module interface with integral LC con‑
nectors. See page 1‑39 for more information on the Optical Fiber Interface.
Summary of Contents for WheatNet-IP BLADE3
