WheatNet-IP BLADE 3
/ June 2018
page A – 122
A P P E N D I C E S
Here is a screen showing a number of different AES67 devices that have been added
to the system.
Once you have added the to the WNIP system, the next step is to specify the particular
audio streams you want to have inter‑operating between WNIP and your AES67 device. This
is where you’ll make use of the multicast address information you worked out previously.
You’ll need to configure both your xNode device and WNIP with this information; it makes
no difference which you do first, only that you configure both with the same information.
Lets start with the xNode. Open a browser interface to the xNode (remember to use
its newly configured IP address we set previously) and choose the “Sources” menu item.
You’ll see a screen that looks like this. Here we’ve configured the four xNode channels
to make AES67 compatible streams.
Axia’s description of 1/4mc
packet timing
Port to use
Multicast address of stream
Summary of Contents for WheatNet-IP BLADE3
