
Final Fittings 12•5
4
Position the wing [E] onto the brackets
according to (Fig 5.1) and draw a mark
onto the wing in the position of the
bracket.
5.1
5
Mark two points 100mm apart for the
mounting bolts along the line of the
bracket (Fig 5.3).
5.2
5.3
6
Drill the four holes required in the wing.
7
Refit the wing on the bracket and
position. Drill down through the bracket.
8
Secure the wing with dome headed
screws and secure with nyloc nuts.
9
Repeat the process for the other side.
6
Fitting – Wheels
1
Locate from your parts the four road
wheels. And sixteen wheel nuts.
2
Position wheels on to the hubs and
secure with the wheel nuts.
7
Fitting – Wing Mirrors
1
Locate the two mirrors [F] from your
parts. And four M6x16mm counter sunk
setscrews, four M6 nyloc nuts and four
standard M6 washers
NOTE:
The mirrors are attached to the front of the
rollcage.
2
Offer the mirror up to the pre drilled
holes in the rollcage.
3
Insert the two M6x16 counter sunk set
screws through the mirror bracket and
rollcage (Fig 7.1).
7.1
4
Fit a M6 washer on to each setscrew
and secure with nyloc nuts (Fig 7.2).
7.2
8
Fitting – Aero Screen
1
Locate the aero screen [H] from your
parts
2
Position the screen on to the scuttle so
that it sits against the lip moulded into
the scuttle.
3
Drill three 5mm holes in the aero screen
through the scuttle in the location
shown (Fig 8.1).
8.1
4
Locate three M5x16 dome headed
screws, three M5 washers and three M5
nyloc nuts.
5
Insert the dome headed screws into the
holes place a washer on the each screw
and secure with nyloc nuts(Fig 8.2).
8.2
9
Fitting – Nose Ducting
1
Locate from your parts the four ducted
nose panels [I].
NOTE:
The small panels form the sides of the
ducting and the larger two panels the top
and bottom.
2
Rivet the panels together with sixteen
4mm rivets (Fig 9.1).
100mm
20mm