Suspension & Steering Rack 4•6
4.2
5
Preparing -Rose Joints
NOTE:
On all rear wishbones there is a rose joint
that mounts to the upright and allows
adjustment for setting the rear camber and
toe. These rose joints require a reducing
bush to be pressed into the spherical
bearing.
1
Push the reducer in by hand. If the bush
will not go in use a vice to gently push it
in. Ensure the bush goes in square (Fig
5.1).
5.1
2
Put a lock nut on to the rose joint
thread.
3
Screw a rose joint into each lower
wishbone [M] complete with locking
nut, until there are four threads
showing (Fig 5.2).
5.2
6
Fitting -Rear Lower Arms
1
Position the lower wishbone between
the lower chassis brackets (Fig 5.2). The
rose
joint is at the back of the car if the
wishbone is positioned correctly.
2
Locate from your parts two 7/16”x2 ½”
bolts and place a standard washer on
each.
