Revision 20
Chapter 6
Flexible Brake Hoses
Contents
INTRODUCTION .............................................................. 1
Tools Required ................................................................ 1
Parts Required ................................................................ 2
FITTING OF FLEXIABLE BRAKE LINES ............................... 3
1
Fitting – Front Lines ............................................ 3
2
Fitting – Rear Lines ............................................. 3
INTRODUCTION
The flexible brake hoses come in pairs, two front and two rear. The rear hoses are longer than the front two. The hoses are supplied with
locking nuts attached. The hoses fit directly into the calipers and do not require any adapters or hard lines. Copper washers are required to
create a seal between the caliper and the lines.
Tools Required
A.
13mm Spanners x2
B.
½” Spanner
C.
7/16” Spanner
