34
Operation
Troubleshooting
Problem
Possible Cause
Solution
Red and green LEDs
do not illuminate to
indicate the Battery is
charging correctly
Battery not correctly
connected to Charger
Clean Battery Socket
of Charger and
Battery Contacts and
fully slide on to
Charger so it clicks in
a locked Position
Charger not powered
Recheck Mains
Connection
Battery Pack has low
capacity
Battery not being fully
charged
Do not remove
Battery until a full
Charge is indicated
Battery Pack has
been charged over
100 times and
Capacity has started
to reduce
This is normal for
battery packs.
Contact Westfalia
purchase a replace-
ment battery pack
Tool does not start
when Trigger Switch
is depressed
Battery completely
discharged
Recharge battery or
replace with a fully
charged battery
Battery Defective
Replace Battery
Tool defective
Contact the Westfalia
customer Service
