23
Safety Notes
Use the variable speed control of the tool (if fitted) to start the
tool at the correct speed for the accessory or blade fitted.
Do not exert additional pressure on the body of the tool: allow
the blade or accessory to do the work. By not exerting addi-
tional pressure you maintain a safer stronger grip on the power
tool when it breaks through the material, as well as reducing
wear on the power tool which will extend the power tool’s
service life. Additional pressure may also bend or twist the
accessory or blade which may cause it to break and cause
injury. If the power tool allows for being held with one or two
hands hold with two hands whenever possible. Always exer-
cise caution when handling this power tool.
Sawing, cutting and abrasive actions create heat. This may
affect the workpiece and power tool. Always monitor the heat
level and in the event of excessive heat switch off the power
tool and allow to cool before restarting work. Some power tools
depending on design may be more quickly and effectively
cooled by running at high speed without load.
The power tool will draw in dust through the vents on its body.
Excessive accumulation of powdered metal may cause an
electrical hazard and destroy the tool. Always ensure the
environment dust level is safe for the tool and ensure the vents
are not blocked.
For mains-operated power tools, ensure the cable of the power
tool is Always kept behind the tool and never close to where
the accessory or blade is operating.
Do not reach under the workpiece, rest the workpiece on your
body, or hold the workpiece while working on it, as contact with
the blade or accessory protruding from the workpiece can
result in serious injury.
Anti-vibration gloves should be worn when operating power
tools that produce large amount of vibration, especially during
long-term use.
For power tools with a rotating mechanism and accessories
ensure the operator is not wearing clothes or gloves with
