24
Safety Notes
frayed threads, cords etc. that could be entangled in the rotat-
ing mechanism dragging the operator’s hand into the rotating
accessory causing injury. Always wear tight-fitting work
clothes, safety shoes. Remove jewellery and secure long hair.
Never wear fabric-based gloves that can produce strands of
material when operating this type of power tool.
Do not allow sanding sheets to wear away on the sanding pad.
This will damage the surface of the pad requiring replacement
and may cause parts of the sanding sheet to fly off the pad,
causing operator injury.
Do not touch the moving sanding sheet.
Wire brush bristles are thrown by the brush even during
ordinary operation. Do not overstress the wires by applying
excessive load to the brush. The wire bristles can easily pene-
trate light clothing and skin.
Periodically check all nuts, bolts and other fixings and tighten
where necessary.
Note:
The tool must only be used for its intended purpose. Any
use other than those mentioned in this manual will be considered
a case of misuse.
Additional Battery and Charger Safety Notes
WARNING:
Li-Ion batteries, if incorrectly used, stored or charged
are a fire, burn and explosion hazard.
Use the battery charger correctly
Refer to the section of this manual relating to use of the battery
charger before attempting to charge the battery.
Do not attempt to use the charger with any batteries other than
those supplied. Keep your battery charger clean; foreign ob-
jects or dirt may cause a short or block air vents. Failure to
follow these instructions may cause overheating or fire.
Only charge Li-Ion batteries using the charger provided or
designed specifically for your product.
