![background image](http://html1.mh-extra.com/html/westfalia/85-27-06/85-27-06_instruction-manual_963056029.webp)
Programming
25
P9 Photocell Beam System
Press FUNC to confirm
00
this setting.
00 = the photocell beam mode is deactivated. If the setting 00 is
not set, the gate opener will not function.
The display shows
PA
.
The unit is in the mode “Automatic Closing Time“.
Attention!
The gate opener is equipped with automatic closing time function.
That means the gate will stay for a while open and will automatically
close after the adjusted time.
PA Automatic Closing Time
1. Press INC or DEC.
Factory setting = 60 sec. Settings from 0
– 99 sec. are possible.
0
= automatic closing time is deactivated. That means the gate
will stay open and will not close automatically. The gate has to
be closed by pressing the remote control.
5
= the gate will stay open for approx. 5 seconds and then it will
close automatically, etc.
2. For storing press FUNC.
The display shows
Pb
.
The opener
is in the mode “Soft Start“.
Pb Soft Start
Soft Start function means that the gate will be opened softly and not
fitfully.
1. Press INC or DEC.
Factory setting = 3 sec. Settings from 1
– 9 sec. are possible.
2. For storing press FUNC.
The display shows
PC
.
The unit is now in the mode “Setting Fast Run Time and Soft
Stop Time
”.
Summary of Contents for 85 27 06
Page 17: ...Mounting 13...