Using
30
Limit Switch A
Magnetic Ring
Limit Switch B
Adjusting the Limit Switch for gate opener 2
Proceed as mentioned for the gate opener 1.
Turn on power supply and allow the moving rod to automatically
extend to out.
Attention: The built-in magnetic ring has to be positioned between
the limit switch A and B. That means the limit switch B should not be
pushed too close to the limit switch A.
EMERGENCY Release
In case of power cut-off or system failure the
gate opener can be manually unlocked. By
doing this the gate opener can be opened and
closed by hand.
Insert the triangular key into the opening and
turn the key clockwise. The motor is now
unlocked.
Using the Remote Control from the Car
1. The gate is closed. Hold the remote control close to the
windshield and press the button. When pressing the button, the
gate will open.
2. Always wait until the gate is completely opened before driving in
or out.
Summary of Contents for 85 27 06
Page 17: ...Mounting 13...