Mounting
16
Braces
Wood/
Metal
Braces
Sturdy Metal Tube
8
Gate is OPENED
10 mm Holes
Mark the drilling holes through the gate
bracket and drill holes with 10 mm diameter
into the gate. Tighten all screws and nuts.
Protruding bolt ends (10) should be cut with
the hacksaw.
Cover the gate opener while drilling. Please
note that dust and swarf might damage the
gate opener.
Use the included screws or other suitable
screws and dowels for the resp. surface.
If the braces of the gate are thin, the
braces can be reinforced with sturdy metal tubes. By doing this, the
gate bracket (8) can be mounted securely on the braces. A wooden
or metal plate can also be screwed on the gate.
Drill Holes
Bracket Assy
Summary of Contents for 85 27 06
Page 17: ...Mounting 13...