![background image](http://html1.mh-extra.com/html/westfalia/18-39-13/18-39-13_instruction-manual_963053029.webp)
Programming
25
Pd Return to Factory Settings
If it will be necessary to set the program to factory setting, proceed as follows:
1.
Hold the button
FUNC
pressed for more than 4 seconds.
2.
The display shows
P1
. The unit is in the setting mode for operating 1 resp. 2
gate openers.
3.
Press the button
FUNC
several times until the display shows
Pd
.
4.
Hold the button
INC
pressed for approx. 2 seconds in order to set the
program to factory settings. The display shows
dF
.
5.
If all adjustments are made and in order to quit the program, press the button
FUNC
. The display shows
“
– –
“. The unit enters Standby mode again.