Programming
22
The display shows
P6
. The unit is now in the mode
“Blocking Force for gate
opener 2
”
P6 Adjusting the Blocking Force for Gate Opener 2
1.
Press the button
INC
or
DEC
in order to start settings.
Factory setting for the sensitivity is 3. Settings from 1
– 9 are possible. Each
time you press the button
INC
, the value will increase and when pressing the
button
DEC
, the value will decrease.
2.
Press the button
FUNC
in order to store the settings.
Hint: You may need to increase the blocking force in cold weather due to
increased resistance from the gate hinges.
The display shows
P7
. The unit is now in the mode
“Closing Time for gate
opener 1
”.
P7 Closing Time for Gate Opener 1
1.
Press the button
INC
or
DEC
in order to adjust the closing time.
Factory setting for the closing time is 30 seconds. Settings from 0
– 40
seconds are possible. Each time you press the button
INC
, the value will
increase and when pressing the button
DEC
, the value will decrease. Hold
the buttons
INC
or
DEC
pressed in order to speed up the value.
2.
Press the button
FUNC
in order to store the settings.
The display shows
P8
.
The unit is now in the mode “Closing Time for gate
opener 2”.
P8 Closing Time for Gate Opener 2
1.
Press the button
INC
or
DEC
in order to adjust the closing speed.
Factory setting for the closing time is 30 seconds. Settings from 0
– 40
seconds are possible. Each time you press the button
INC
, the value will
increase and when pressing the button
DEC
, the value will decrease. Hold
the buttons
INC
or
DEC
pressed in order to speed up the value.
2.
Press the button
FUNC
in order to store the settings.
The display shows
P9
.
The unit is now in the mode “Photocell Beam System”
(not available).
P9 Photocell Beam System
1.
Press the buttons
INC
or
DEC
and set
00
. 00 indicates that the photocell
beam system is deactivated. If the setting 00 is not set, the gate opener will
not function.