57
Create Route Plan>Backup Route
Backup Route Active:
Active the backup routes or not.
Outgoing Type:
Define backup routes outgoing call type.
Hunting Type:
The hunting method was used for this route. Please
refer to the Primary Route.
Routing List:
The backup routing target list was used for this route.
Route DM Group:
Select DM group 1 to 4 in case that the backup
required the DM before making the call. The DNIS is unchanged by the
primary route DM and the same as the DNIS before routing. For
example, the DNIS is 886282265699 and primary DM group remove
886 and use it (DNIS = 282265699) to make call. When backup route
is started, the DNIS is still unchanged as 886282265699. This makes
the DM easy to predict and implement.
2 special default route, “VOIP Default Route” and “FXS default Route”,
are used as the default routing when there is not any other routing are
matched. It is not recommended to disable these 2 default routes. The
FXS default route was used as FXS outgoing call’s default routes. VOIP
default route is used as VOIP incoming call’s default routing.
Notice:
In this mode all of the VOIP and FXO incoming calls was
forced to route to FXS port. The VOIP incoming call can’t route to FXO
port to dial out.
