13
VOIP VLAN:
Enable VOIP VLAN or not. When enable VOIP VLAN, the
WAN port can be only accessed by VLAN. If it is required to manage the
WellGate 2522, Administrator can use LAN port to access this gateway
instead.
VOIP VLAN ID (2-4096):
VLAN ID range to be used.
Note: the default WAN IP address is 10.1.1.3.
LAN Setting:
Management:
This LAN port is used for management purpose, not used for
register to SIP Server or data/voice routing.
NAT mode:
DHCP function on the LAN port. The LAN port functions as a DHCP
server, network devices connected to them will be assigned one IP address
according to DHCP server IP range. (Please refer to command “NAT setting” on
the left side commands how to define DHCP IP address.)
IP Address
:
IPV4 address (please set to 192.168.x.x if your WAN port is
using 10.x.x.x IP segment).
Netmask:
IPV4 network subnet mask
IPV6 IP Address:
IPV6 address
IPV6 IP Prefix Length:
IPV6 prefix length
Bridge mode:
At this mode, both WAN and LAN ports are configured to
Switch/Hub features. LAN port access to WAN port directly.
Note: default LAN IP address is 192.168.123.123
DDNS (DynDNS) Setting:
DDNS (DynDNS):
enable or disable dynamic DNS feature.
Domain Name:
input
your Domain Name
User Name:
input your user name
Password:
input your password
