59
Incoming Call Type:
Incoming call type
VOIP:
The incoming SIP call type
FXO:
The PSTN incoming call type
FXS:
The FXS outgoing call type
Matched Prefix:
matched DNIS (called number) prefix
Matched Incoming List:
matched DNIS incoming interface target
For VOIP incoming call type, the incoming target will be
the SIP trunk ID. Only the call from the selected SIP
Trunk will be accepted for this route.
For PSTN(FXO port) incoming call type, the incoming
target will be the line ID (Line1 or Line2). Only the call is
coming from the selected line will be accepted for this
route.
For FXS incoming call type, the incoming target will be
the line ID (TEL1 or TEL2). Only the call is coming from
the selected line will be accepted for this route.
Matched Length:
matched DNIS (called number) length. To ignore
the length, please set to 0.
No Answer Timeout:
How long does the hunting continue to next
when the called target doesn’t answer.
Create Route Plan>Primary Route
Outgoing Type:
Outgoing call type (FXO or FXS or VOIP)
Hunting Type:
The hunting method was used for this route.
Priority Ring:
The call was hunted based on the routing
list order one by one.
Cyclic Ring:
The call was hunted based on the cyclic
basis. This is the recommended method.
Routing List:
The routing target list was used for this route.
DM Group:
Select DM group 1 to 4 in case that it requires a DM (for
example, remove the prefix) before making the call.
Create Route Plan>Backup Route
Backup Route Active:
Active the backup route or not.
Outgoing Type:
The backup route outgoing call type.
Hunting Type:
The hunting method will be used for this route. Please
refer to the Primary Route.
Routing List:
The backup routing target list will be used for this route.
Route DM Group:
Select DM group 1 to 4 in case the backup required
the DM before to make the call. The DNIS is unchanged by the primary
route DM and same as the DNIS before routing. For example, the DNIS
is 886282265699 and primary DM group remove 886 and use it (DNIS
