67
Appendix C --- HTTP auto provision
Get the HTTP provision packet from Welltech and start the provision as
follows:
Step 1: Build mac list for mass configuration file generation
Please open the “wg2522 MAC.csv or wg2522 MAC.csv” which was provided
from Welltech by using Microsoft Excel. You can refer to the picture below.
Normally, you should get all required configuration mac list from Welltech and
use it to configure file generation if you have ordered a bulk of quantity.
For FXS and sip trunk>
The wg2522 MAC.csv contains most frequent changed parameters as follows:
MACAddress:
Wellgate 2522 MAC Address
fxs1.displayname ~ fxs2.displayname:
display name for each line
fxs1.password ~ fxs2.password:
user password for register to SIP proxy
for each line
fxs1.telno ~ fxs2.telno:
telephone number for each line
fxs1.userid ~ fxs2.userid:
user id for register to SIP proxy for each line
Siptk1.displayname ~ siptk4.displayname:
display name for each line
Siptk1.userid ~ siptk4.userid:
user ID for register to SIP proxy for each
line
siptk1.password ~ siptk4.password:
user password for register to SIP
proxy for each line
Siptk1.telno ~ siptk4.telno:
telephone number for each line
Step 2: create a template configuration file
Open the “wg2522 Parameter.txt” which was provided by Welltech and make
the required changes. Please make some changes for those provision and SIP
proxy settings at least. For details, please refer to the comments of “wg2522
Parameter.txt”.
Step 3: Make the changes for “wegencfg.ini” as follows if it is
necessary
# Template File
BaseFile=.\wg2522 Parameter.txt
# MAC list file
ListFile=.\wg2522 MAC.csv
# 0: Off, 1: On
