54
Route Plan:
The routing policy is the core feature of WellGate 2522. The policy is based on
incoming call type, destination, length and prefix code to determine the
outgoing call routes and process. There are three routes to go for each
incoming call port as follows.
Note: The following rules do not apply to
PABX Mode.
1. VOIP incoming call to WellGate 2522, it routes to either FXO or FXS
interface and vice versa.
2. FXO incoming call to WellGate 2522, it routes to either VoIP or FXS interface
and vice versa.
3. FXS incoming call (it means FXS off hook and dialing out) to WellGate 2522,
it routes to either FXO or VoIP interface and vice versa.
For PABX Mode interface>
For this application, FXS outgoing call was routed to either VOIP or FXO and
vice versa. The default route is that VOIP incoming call was routed to FXS and
FXS call was routed to VOIP network.
Note: The PABX mode follows
these rules to routes call as follows.
1.
When FXO has incoming call to WellGate 2522, it routes to FXS port Only.
2.
When VoIP has incoming call to WellGate 2522, it routes to FXS port Only.
3.
When FXS make a dial out, the routes call was redirected to either VoIP or
FXO according to this gateway’s DM and routing plan.
Incoming Call Type:
The incoming call port is FXS or VOIP.
Matched Prefix:
matched DNIS (called number) prefix
Matched Incoming List:
matched DNIS incoming interface target
